This is the only Information that you may use as " Notes" for the 170 and  150 Applied Examinations, you may NOT use any other part of our web page to assist you for this test.


Remember to use the I & J method in Machining G2 & G3 commands, the R method is not excepted.


Don't forget to use the notes below if you need to.
The Complete Emulator Instructions
Waynes Machine Specifications, and some Handy Equations  (There is a lot of good stuff in here)
Basic G & M Code List for MACT 150 Class
Fixed_Cycles_Examples for 170 & 150 Classes
Fadal G & M Codes   (170 Class will need this)
Jeff's Emulator Notes
Program Self Check Off Sheet in Xls Format
Program Self Check Off Sheet in Html Format


FADAL User Manual 
Section  Description M.A.C.T. Class Num.   Week Number
Section 01 Summary  
Section 02 M Functions Review from MACT 150 Class  
Section 03 G Codes Review from MACT 150 Class  
Section 04 Fixed Cycles Read this Section 170 Class  
Fixed_Cycles_Examples  Given to you as Handout
Section 05 Subroutines " User Defined " Read this Section 170 Class  
Section 06 Fixed Subroutines Read this Section 170 Class  
Section 07 Keyboard Informational 170 Class  
Roys Lettering Explanation Roys Lettering Explanation Use this for lettering In Microsoft Document  Format
Section 08 Commands Read this Section 170 Class  
Section 09 CRC ( Cutter Compensation ) Read this Section 150/170 Class  
Section 10 Error Messages Informational 170 Class  
Section 11 Coordinate Systems Review from MACT 150 Class  
Section 12 Rotary Axes Read this Section 170 Class  
Section 13 Interpolation  Review from MACT 150 Class  
Section 14 Communications Informational 170 Class  
Section 15 Touch Probes Informational 170 Class  
Section 16 Command Menus Read this Section 170 Class  
Section 17 Pallet Changer Informational 170 Class  
Section 18 Macros Informational 170 Class  
Section 19 Miscellaneous Informational 170 Class  
Section 20 Graphics Read this Section 170 Class  
Section 21 Formats Read this Section 170 Class  
Quick References
Command Menu Read for 150/170 Class  
Command Summary Read for 150/170 Class  
Error Codes Read for 150/170 Class  
Program Codes G & M Codes Read for 150/170 Class Your G & M Code List 
Fadal Operators Manual
Section 01 Power On/Off Read for 150/170 Class  
Section 02 Pendant Read for 150/170 Class  
Section 03 Jog Mode Read for 150/170 Class  
Section 04 Run Mode Read for 150/170 Class  
Section 05 Emergency Stop Read for 150/170 Class  
Section 06 Formats Operator Read for 150/170 Class  
Section 07 Spindle  Read for 150/170 Class  
Section 08 Tool Changer Read for 150/170 Class  
Section 09 Coolant  Read for 150/170 Class  
Section 10 Commands  Read for 150/170 Class  
Index Index for Operator Manual Read for 150/170 Class  
Information at Fadal Fadal's Web Site Complete Information Site Use Internet Explorer

Don't forget to use the notes below
The Complete Emulator Instructions
Waynes Machine Specifications, and some handy equations
Basic G & M Code List for MACT 150 Class
Fixed_Cycles_Examples for 170 & 150 Classes
Jeff's Emulator Notes
Program Self Check Off Sheet in Xls Format
Program Self Check Off Sheet in Html Format